| Model SEPS |
50112 |
| Rated Power |
500W |
| Peak Power(20ms) |
1500W |
| Start Motor |
0.5HP |
| Battery Voltage |
12VDC |
| Inside Battery Capacity |
200Ah*1 |
| Size(L*W*Hmm) |
600*300*495 |
| Package Size (L*W*Hmm) |
660*360*620 |
| N.W.(kg) Without Battery |
27 |
| G.W.(kg) Without Battery Carton Packing |
30 |
| Installation Method |
Tower |
| Parameter |
| Input |
DC Input Voltage Range |
10.5-15VDC(Single battery voltage) |
| AC Input Voltage Range |
73VAC~138VAC / 145VAC~275VAC |
| AC Input Frequency Range |
45Hz~65Hz |
| Max AC charging current |
6A~15A (Depending on the model) |
| AC charging voltage |
LEAD battery:Charge Voltage :14V; Float Voltage:13.8V(Single battery voltage) |
| AC charging method |
Three-stage (constant current, constant voltage, floating charge) |
| Output |
Efficiency(Battery Mode) |
≥85% |
| Output Voltage(Battery Mode) |
110VAC±2% / 220VAC±2% |
| Output Frequency(Battery Mode) |
50/60Hz±1% |
| Output Wave(Battery Mode) |
Pure Sine Wave |
| Efficiency(AC Mode) |
>99% |
| Output Voltage(AC Mode) |
110VAC±10% / 220VAC±10% |
| Output Frequency(AC Mode) |
Tracking Automatically |
| Output waveform distortion(Battery Mode) |
≤3%(Linear load) |
| No load loss(Battery Mode) |
≤1% rated power |
| No load loss(AC Mode) |
≤2% rated power( charger does not work in AC mode) |
| No load loss(Energy saving Mode) |
≤10W |
| Battery Type |
Customize battery |
Charge and discharge parameters of different types of batteries (such as lithium batteries, etc.)
can be customized according to user requirements |
| Protection |
Battery undervoltage alarm |
11V(Single battery voltage) |
| Battery undervoltage protection |
10.5V(Single battery voltage) |
| Battery overvoltage alarm |
15V(Single battery voltage) |
| Battery overvoltage protection |
17V(Single battery voltage) |
| Battery overvoltage recovery voltage |
14.5V(Single battery voltage) |
| Overload power protection |
Automatic protection (battery mode), circuit breaker or insurance (AC mode) |
| Output short circuit protection |
Automatic protection (battery mode), circuit breaker or insurance (AC mode) |
| Temperature protection |
>90°C(Shut down output) |
| Alarm |
A |
Normal working condition, buzzer has no alarm sound |
| B |
Buzzer sounds 4 times per second when battery failure, voltage abnormality, overload protection |
| C |
When the machine is turned on for the first time, the buzzer will prompt 5 when the machine is normal |
Inside Solar controller
(Optional) |
Charging Mode |
MPPT or PWM |
| Charging current |
10A/20A/30A/40A/50A/60A |
| PV Input Voltage Range |
PWM: 15V-44V / MPPT: 15V-120V |
Max PV Input Voltage
(At the lowest temperature) |
PWM: 50V / MPPT: 150V |
| PV Array Maximum Power |
140W(10A)/280W(20A)/420W(30A)/560W(40A)/700W(50A)/840W(60A) |
| Standby loss |
≤3W |
| Maximum conversion efficiency |
>95% |
| Working Mode |
Battery First/AC First/Saving Energy Mode |
| Transfer Time |
≤4ms |
| Display |
LCD |
| Thermal method |
Cooling fan in intelligent control |
| Communication |
RS232(Optional) |
| Environment |
Operating temperature |
-10℃~40℃ |
| Storage temperature |
-15℃~60℃ |
| Noise |
≤55dB |
| Elevation |
2000m(More than derating) |
| Humidity |
0%~95% ,No condensation |
| Warranty |
1 year |
